Specification Update

Monthly Specification Update
Contents
Preface.........................................................................................................................................6
Summary Tables of Changes.....................................................................................................7
Errata............................................................................................................................................9
1. Returning to the BIOS Setup Utility from EFI causes the system to hang after
using the Syscfg utility.............................................................................................9
2. Platform Confidence Test reports a hard disk test error with BIOS Setup option
SATA Mode set to ‘Enhanced’. ...............................................................................9
3. After clearing the CMOS, BIOS Setup will report that Open Loop Throughput
(OLTT) is set even though memory supporting Closed Loop Thermal Throttling
(CLTT) is installed. ..................................................................................................9
4. Junk characters appear while listing the directories in DOS..................................10
5. Memory resource conflicts on device “Intel® 5400 chipset Quickdata
Technology Device 402F”. ....................................................................................10
6. SR1560SF system doesn’t implement chassis intrusion function .........................10
7. RHEL5 /Xen can not boot with SW RAID enabled.................................................10
8. Current SW RAID drivers are not present in IDA CD.............................................11
9. BIOS changes boot order after removing USB devices.........................................11
Documentation Changes..........................................................................................................12
1. Administrator/user password is case sensitive that doesn’t match BIOS EPS
v1.0........................................................................................................................12
2. The Intel
®
Server Board S5400SF and Server System SR1560SF product
Configuration Guide contains non-productized items mm#891283.......................12
3. Default value for “Memory Mapped I/O Start Address” doesn’t match with BIOS
EPS v1.0 ...............................................................................................................12
4. Supported ISMS version as documented in the TPS v1.0 is being updated to
reflect most current release...................................................................................12