Service Guide

Intel

Server System SR1560SF Service Guide 39

Figure 40. Removing PCI Riser Assembly from the Server System

Installing the PCI Riser Assembly

1. Lower the riser assembly into place (see letter “A”).

2. Align the two hooks in the riser assembly with the matching slots at the back of the

server system (see letter “B”).

Figure 41. Installing PCI Riser Assembly into the Server System

3. Press down uniformly until the two hooks on the rear of the PCI riser assembly

engage the server system back panel slots. The riser card will seat into the matching

socket on the server board. Ensure that the riser card is fully seated.

AF002354

AF002355