Service Guide

24 Intel
®
Server System SR1560SF Service Guide
Removing and Installing the Processor Air Duct
Always operate your server system with the processor air duct in place. The air duct is
required for proper airflow within the server system.
Removing the Processor Air Duct
Lift the processor air duct from its location over the two processor sockets.
Figure 18. Removing the Processor Air Duct
Installing the Processor Air Duct
Turn processor air duct over to reveal underside. If two processors are installed: remove
air dam by rocking it back and forth until it snaps off.
Notes: Do not remove the air dam if only one processor is installed.
Figure 19. Removing the Processor 2 Air Dam (Optional - only if two
processors are installed)
AF002362
AF002366