Service Guide

16 Intel
®
Server System SR1560SF Service Guide
Figure 11. Standard Control Panel
Bezels
The optional front bezel provides a snap-on design that allows for maximum airflow
through the server system. The bezel fits a system that has the standard control panel
installed (with or without a video port). The bezel provides a lock to secure the hard drive
and optical drive area. For instructions on installing the front bezel, see “Installing the
Front Bezel”.
The order number for the bezel is:
• ADWBEZBLACK: Black bezel for use with the standard control panel.
E. Hard Disk Drive
Activity LED
Random blinking green light indicates hard disk drive activity (SAS
or SATA).
No light indicates no hard disk drive activity.
F. System Status LED Solid green indicates normal operation.
Blinking green indicates degraded performance.
Solid amber indicates a critical or non-recoverable condition.
Blinking amber indicates a non-critical condition.
No light indicates POST is running or the system is off.
G. System Identification
LED
Solid blue indicates system identification is active.
No light indicates system identification is not activated.
H. System Identification
Button
Turns on/off the system identification LED.
I. Reset Button Reboots and initializes the system.
J. USB 2.0 Port Allows you to attach a USB component to the front of the chassis.
K. NMI Button Puts the server in a halt-state for diagnostic purposes.
L. Video Port Allows you to attach a video monitor to the front of the chassis.
The front and rear video ports cannot be used at the same time.
NOTE: Note: the video port option is only available on the hot-
swap drive system (product code SR1560SFHS).
Callout Feature Function