Technical Product Specification

Intel® Server System SR1560SF TPS Standard Control Panel Functionality

Revision 1.2

Intel order number D92959-006

The blue “System ID” LED can be illuminated using either of the following two mechanisms:

- By pressing the system ID button on the system control panel the ID LED will display a

solid blue color, until the button is pressed again.

- By issuing the appropriate hex IPMI “Chassis Identify” value, the ID LED will either blink

blue for 15 seconds and turn off or will blink indefinitely until the appropriate hex IPMI

Chassis Identify value is issued to turn it off.

7.3 Control Panel Connectors

The control panel has two external I/O connectors:

 One USB port

 One VGA video port (backplane configurations only)

The following tables provide the pin-outs for each connector:

Table 42. External USB Connectors (J1B1)

Pin # Description

1 PWR_FP_USB2

2 USB_DN2_FP_R

3 USB_DP2_FP_R

4 GND

5 GND

6 GND

7 GND

Table 43. Video Connector (J1A1)

Description Pin # Pin # Description

VGA_RED 1 9 GND

VGA_GREEN 2 10 GND

VGA_BLUE 3 11 Unused

Unused 4 12 VGA_DDCDAT

GND 5 13 VGA_HSYNC_L

GND 6 14 VGA_VSYNC_L

VGA_INUSE_L 7 15 VGA_DDCCLK

GND 8 16 GND

17 GND

If a monitor is connected to the front panel video connector, the rear video port on the server

board will be disabled and the front panel video will be enabled. The video source is the same

for both connectors and is switched between the two, with the control panel having priority over

the rear video. This provides for easy front accessibility to the server.