System Configuration User Guide

[BIOS]
[BIOS::ADVANCED]
[BIOS::ADVANCED::MEMORY CONFIGURATION]
[BIOS::ADVANCED::MEMORY CONFIGURATION::MEMORY RAS AND PERFORMANCE
CONFIGURATION]
Select Memory RAS Configuration=0 ;Options: 1=Mirroring:
0=Maximum Performance
NUMA Optimized=1 ;Options: 1=Enabled:
0=Disabled
[BIOS::ADVANCED::MASS STORAGE CONTROLLER CONFIGURATION]
Onboard SATA Controller=1 ;Options: 1=Enabled:
0=Disabled
SATA Mode=0 ;Options: 2=SW RAID:
1=AHCI: 3=COMPATIBILITY: 0=ENHANCED
[BIOS::ADVANCED::SERIAL PORT CONFIGURATION]
[BIOS::ADVANCED::SERIAL PORT CONFIGURATION::SERIAL A ENABLE]
Serial A Enable=1 ;Options: 1=Enabled:
0=Disabled
Address=1016 ;Options: 744=2E8:
1000=3E8: 760=2F8: 1016=3F8
IRQ=4 ;Options: 4=4: 3=3
[BIOS::ADVANCED::SERIAL PORT CONFIGURATION::SERIAL B ENABLE]
Serial B Enable=1 ;Options: 1=Enabled:
0=Disabled
Address=760 ;Options: 744=2E8:
1000=3E8: 760=2F8: 1016=3F8
IRQ=3 ;Options: 4=4: 3=3
[BIOS::ADVANCED::USB CONFIGURATION]
USB Controller=1 ;Options: 1=Enabled:
0=Disabled
Legacy USB Support=0 ;Options: 2=Auto:
1=Disabled: 0=Enabled
Port 60/64 Emulation=1 ;Options: 1=Enabled:
0=Disabled
Make USB Devices Non-Bootable=0 ;Options: 1=Enabled:
0=Disabled
Device Reset Timeout=1 ;Options: 3=40 seconds:
2=30 seconds: 1=20 seconds: 0=10 seconds
USB 2.0 Controller=1 ;Options: 1=Enabled:
0=Disabled
Intel® System Configuration Utility – User Guide 63