System Configuration User Guide

syscfg /sc 4 2d none+straight+MD5
4.4.23 Serial Dial String (/sds)
syscfg {/sds | /serialdialstring} Channel_ID Dial_String_Index Dial_string
Channel_ID
IPMI Channel ID (this must be 4 for
S5000PAL, S5000PSL, and S5000PSA server
boards)
Dial_String_Index
Dial String Index
Dial_String
ASCII string with the modem dial command
and phone number
Sets the serial modem dial string used by the BMC on the specified channel. See IPMI 2.0
Specification, Chapters 14 and 25, for more information on IPMI Serial/Modem interface and
commands.
Note: This command is not supported on Intel® Server Boards X38MLST, S3200SH, S55XX
and S3420GP.
Example:
syscfg /sds 4 3 P@S=5154884627,@
4.4.24 Serial Enable (/se)
syscfg {/se | /serialenable} Channel_ID {callback | user | operator | admin} {modem |
direct} {9600 | 19200 | 38400 | 115200}
Channel_ID
IPMI Channel ID (this must be 4 for
S5000PAL, S5000PSL, S5000PSA server
boards)
callback | user | operator |
admin
Serial channel privilege level
modem | direct
Modem or direct connection
9600 | 19200 | 38400 | 115200
Baud rate
Enables serial communications with the BMC on the specified channel. See IPMI 2.0
Specification, Chapters 14 and 25, for more information on IPMI Serial/Modem interface and
commands.
Note: This command is not supported on Intel® Server Boards X38MLST, S3200SH, S55XX
and S3420GP.
Example:
syscfg /se 4 admin modem 19200
46 Intel® System Configuration Utility – User Guide