System Configuration User Guide

NEXT_C = if an alert was successfully sent to
the previous destination attempted, do not
send an alert to the destination indicated in
the policy table entry specified in argument
1, but go to the next policy table entry with
the same policy number but that will send an
alert on a different channel.
NEXT_T = if an alert was successfully sent to
the previous destination attempted, do not
send an alert to the destination indicated in
the policy table entry specified in argument
1, but go to the next policy table entry with
the same policy number but a different
destination type.
Channel_ID
IPMI Channel ID for a BMC channel
Destination_table_index
Destination Table Index
Configures the Platform Event Filter policy table used by the BMC on the specified channel.
See IPMI 2.0 Specification, Chapter 17, for more information on Platform Event Filtering.
Note: This command is not supported on Intel® Server Boards X38MLST and S3200SH.
Example:
syscfg /pefp 3 enable 1 always 2 3
4.4.17 Power Restore Policy (/prp)
syscfg /prp {off | on | restore}
off | on | restore
Power restore policy
Sets the power restore policy. See IPMI 2.0 Specification, §28.8, for more information on
the Set Power Restore Policy IPMI Command.
Example:
syscfg /prp off
4.4.18 Reset BMC (/rbmc)
syscfg {/rbmc | resetBMC}
Resets the Baseboard Management Controller.
Examples:
syscfg /rbmc
42 Intel® System Configuration Utility – User Guide