User guide

6 Intel
®
Workstation Board S5000XVN
Configuration Jumpers
Jumper Name Pins What Happens at System Reset
BIOS Bank Select
(J1C3)
1 - 2 Bank 0: Boot to an alternate BIOS.
2 - 3 Boot from the standard BIOS. These pins should be
jumpered for normal operation.
CMOS Clear
(J1D1)
1 - 2 Protect CMOS: these pins should be jumpered for normal
operation.
2 - 3 Erase CMOS: If these pins are jumpered for 5 to 10
seconds, the CMOS settings will be cleared on the next
workstation reset. These pins should not be jumpered for
normal operation.
The workstation does not need to be reset with the
jumpers on these pins for the CMOS to be cleared. To use
the jumper to clear the CMOS: Power down the
workstation, leaving AC power connected. Place the
jumper on pins 2 - 3 for 5 to 10 seconds. Move the jumper
back to pins 1 - 2. Power on the workstation
AF000500
3
2
CMOS Clear
3
2
Password Clear
J1E3
J1D1
Disable
Enable
3
2
BMC Force Update
J1D2
Disable
Enable
BIOS Bank Select
J1C3
3
2
Bank 0
Normal
Operation
(default)
Protect
Clear