User guide

2 Intel
®
Workstation Board S5000XVN
Table 2 summarizes the features of the workstation board.
Table 2. Workstation Board Features
Feature Description
Processor support Support for one from the following list:
• Up to two Dual-Core Intel
®
Xeon
®
processors 5000 or 5100
sequence with a 677-, 1066-, or 1333-MHz front side bus
• Up to two Quad-Core Intel
®
Xeon
®
processors 5300 sequence
with a 1066- or 1333-MHz front side bus
• Up to two 45nm 2P Dual-Core Intel
®
Xeon
®
processors.
Product code S5000XVNSATAR and S5000XVNSASR only
• Up to two 45nm next generation Quad-Core Intel
®
Xeon
®
processors. Product code S5000XVNSATAR and
S5000XVNSASR only
System memory support
• Eight FBDIMM sockets (DDR2-533 and DDR2-667) supporting
32 GB maximum memory
• Quad-channel memory architecture
Intel
®
5000X Chipset • Intel
®
6321ESB I/O Controller Hub
• Intel
®
5000X Memory Controller Hub
Cooling Support for
• Two processor fans (4-pin headers)
• Four front fans (6-pin headers)
• Two rear fans (4-pin header)
3-pin fans are compatible with all fan headers. 4-pin fans should be
used only with the following fans:
• CPU1 Fan
• CPU2 Fan
• Sys Fan 1
• Sys Fan 2
• Sys Fan 5
• Sys Fan 6
Sys Fan 3 and Sys Fan 4 are connected to the CPU1 PWM, which
is programmed to work with the 4-pin active heatsink fans.
Add-in card slots Five expansion slots:
• One PCI-X* 64-bit / 100-MHz slot
• One PCI-X* 64-bit / 100- / 133-MHz slot
• One PCI Express x16 slot
and one of from the following list
• Two PCI Express* x4 slots (Product code S5000XVNSAS or
S5000XVNSASR)
• One PCI Express* x4 slot and one PCI Express x8 slot
(Product code S5000XVNSATA or S5000XVNSATAR)
Video support Use the PCI Express x16 slot to add the video card of your choice