Technical Product Specification

Connector/Header Locations and Pin-outs Intel® Server Boards S5000PSL and S5000XSL TPS

Revision 1.7

Intel order number: D41763-008

Pin Signal Name Description

8 GND Ground

9 TP_VID_CONN_B9 No connection

10 GND Ground

11 TP_VID_CONN_B11 No connection

12 V_IO_DDCDAT DDCDAT

13 V_IO_HSYNC_CONN HSYNC (horizontal sync)

14 V_IO_VSYNC_CONN VSYNC (vertical sync)

15 V_IO_DDCCLK DDCCLK

5.5.2 NIC Connectors

The server board provides two stacked RJ-45/2xUSB connectors side-by-side on the back edge

of the board (JA6A1, JA6A2). The pin-out for NIC connectors are identical and are defined in

the following table:

Table 28. RJ-45 10/100/1000 NIC Connector Pin-out (JA6A1, JA6A2)

Pin Signal Name

1 GND

2 P1V8_NIC

3 NIC_A_MDI3P

4 NIC_A_MDI3N

5 NIC_A_MDI2P

6 NIC_A_MDI2N

7 NIC_A_MDI1P

8 NIC_A_MDI1N

9 NIC_A_MDI0P

10 NIC_A_MDI0N

11 (D1) NIC_LINKA_1000_N (LED

12 (D2) NIC_LINKA_100_N (LED)

13 (D3) NIC_ACT_LED_N

14 NIC_LINK_LED_N

15 GND

16 GND

5.5.3 IDE Connector

The server board provides one legacy IDE ATA100 40-pin connector (J2J2). The pin-out is

defined in the following table.

Table 29. IDE 40-pin Connector Pin-out (J2J2)

Pin Signal Name Pin Signal Name

1 ESB_PLT_RST_IDE_N 2 GND

3 RIDE_DD_7 4 RIDE_DD_8