System Configuration User Guide

4.4.27 Serial Over LAN Enable (/sole)
syscfg {/sole | /soleenable} Channel_ID {enable | disable} {user | operator | admin}
{9600 | 19200 | 38400 | 115200} {0..7} {0..2550}
Channel_ID
IPMI Channel ID
enable | disable
SOL enable
user | operator | admin
Privilege Level Limit
9600 | 19200 | 38400 | 115200
Baud Rate
0..7
Retry count
0..2550
Retry interval in milliseconds, rounded to the
nearest 10 ms
Enables Serial Over LAN (SOL) on the specified LAN channel.
See IPMI 2.0 Specification, Chapter 26, for more information on IPMI SOL commands.
Example:
syscfg /sole 1 Enable Operator 19200 6 200
4.4.28 Terminal Enable (/te)
syscfg {/te | /termenable} Channel_ID {enable | disable} {BSB | DEL} {enable | disable}
{enable | disable} {CRLF | NULL | CR | LFCR | LF} {CR | NULL}
Channel_ID
IPMI Channel ID (this must be 4 for
S5000PAL, S5000PSL, and S5000PSA server
boards)
enable | disable
Line Edit enable
BSB | DEL
Delete control
enable | disable
Echo control
enable | disable
Handshake control
CRLF | NULL | CR | LFCR | LF
Output newline sequence
CR | NULL
Input newline sequence
Configures terminal mode communications on the specified BMC channel. See IPMI 2.0
Specification, Chapters 14 and 25, for more information on IPMI Serial/Modem interface and
commands.
Note: This command is not supported on Intel® Server Boards X38MLST, S3200SH, S55XX
and S3420GP.
Example:
syscfg /te 4 enable DEL enable enable lfcr cr
48 Intel® System Configuration Utility – User Guide