System Configuration User Guide

valid option when the source is set to

DHCP.)

Selects Gateway MAC Address

Selects Backup Gateway IP Address

Selects Backup Gateway MAC Address

Selects Community String

Up to a 64 byte ASCII string (printable

characters in the range 0x21 to 0x7e)

DHCP Host Name String

Configures the LAN settings on a specific channel. This option is similar to /lac, but it is used

to only configure one parameter at a time. Select the parameter by choosing one of the

parameter number listed above (2a, 2b, … 16) followed by a value.

See IPMI 2.0 Specification for more information

Notes:

• The Host IP, Subnet Mask and Default Gateway IP cannot be set when DHCP is

enabled for the LAN channel.

• The Host MAC address cannot be set for any LAN channel in ESB2 BMC.

• The BMC ARP data can only be set for ESB2 LAN channels (LAN channels 1 and 2

are ESB2 LAN channels).

• The BMC-generated ARP responses cannot be set to “disable” on

S3200/X38MLST, S55xx and S3420GP platform series.

• The Gratuitous ARP is not supported on S3200/X38MLST, S55xx and S3420GP

platform series.

• The Gratuitous ARP interval value cannot be set on S3200/X38MLST, S55xx and

S3420GP platform series.

• The DHCP Host Name is common for all LAN Channels.

• The set DHCP Host name will be used on the next DHCP lease renewal or at the

current lease expiration

Example:

syscfg /lc 1 2b none+straight+md5

syscfg /lc 1 C7 TestDHCPHostName

Intel® System Configuration Utility – User Guide 39