Product User Guide

16
Figure 10: Psetup Tool (Linux Version)
When first launched, psetup automatically scans and auto-detects all Intel
®
RMM2 modules
on the local host and on the subnet. The MAC addresses of all detected modules are
available as a drop down list. This list allows you to connect and configure individual Intel
®
RMM2 modules. You can restart the auto-detection by clicking on "Refresh Devices".
After selecting a device by MAC address, the "Device Type" will show "Intel(R) RMM2". You
are now able to query the current network settings of that device by "Query Device". To
change the network settings or assign a new administrator password, you will need to
authenticate as an administrator. See the section called “Authentication”.
Note: The Linux version of psetup needs module “sg” running on the system to detect a local
Intel
®
RMM2; execute command “ modprobe sg ” to load this module.
3.3 Mac Address Detection
3.3.1 Using the Psetup Utility for Windows*
On the upper left corner, the MAC address of the Intel
®
RMM2 is displayed. To detect the MAC
address manually, click the Refresh Devices button. The displayed MAC address is the same
MAC address printed on the sticker placed on the Intel
®
RMM2. On the lower right corner of the
window, there are two buttons: Query Device and Setup Device. Click the Query Device button to
display the preconfigured values of the network configuration. The values are displayed in the text