Technical Product Specification

Intel® Remote Management Module IntelP®P Remote Management Module Environmental/Electrical Specifications
4.5 MII Interface
The Media Independent Interface (MII) is an Ethernet (IEEE 802.3) standard for communication
between an Ethernet MAC (Media Access Controller) device and an Ethernet PHY (Physical
layer interface) device. The MII specification defines 16 pins per port for data and control. The
MII allows the Davicom Ethernet controller* on the Intel RMM to communicate with the 10/100
Ethern hip on th M NIC.
The In RMM NIC module provides the RJ 45 connector for connection to the LAN via a
Category 5 network cable. The RJ45 connector on the Intel RMM NIC module has two LEDs
that indicate the LAN connector state. One of the LEDs indicates link activity and the other
indicates the LAN speed (10 or 100 Mb/S).
4.6 O V DC/EDID ecificat s
he tab below Bus DC Spec ations:
us DC Specifications
®
et PHY c e Intel
®
RM
tel
®
®
DV ideo and D Sp ion
T le outlines DVO ific
Table 11. DVO B
Parameter Condition Minimum Maximum
VIL- Low level input voltage Vout </=
Vout >/= VOH(Minimum) or
VOL(Maximum) -0.3 V 1.0 V
VIH- High level input voltage Vout </= VOL(Maximum) 2.5 V 3.6 V
Vout >/= VOH(Minimum) or
IIN- Input current V +/-10 uA in =0 or Vin = 3.3 V
VOL- Low level output voltag =3.1V, IOL=2mA .e VDD 0 4 V
VOH- High level output voltage VDD=3.1V, IOH=-2mA 3.1 V
4.6.1 DVO Interface
The DVO interface consists of three groups of five signals that represent standard digital video
he gr
Red
 Gree
lue
ddition to hic controller he bas ard nerates
the following
 Clock
data. T oups are as follows:
 signals
n signals
 B signals
In a the 15 video data signals, the ATI* grap
signals:
s on t ebo ge
 Data enable
 Horizontal sync signals
 Vertical sync signals
Revision 1.0
31