User Guide

40 Intel
®
Remote Management Module User’s Guide
USER/<number>/NAME The SET version is used to
add a user. The <number> is
not needed or used for the
ADD operation. The read
operation enumerates users.
(1-based indexing).
First get the USER/COUNT,
and then get their names via
this command. To add a user,
e.g. USER/NAME=Bob.
Read-write User Name.
Up to 8 ASCII bytes.
USER/<username>/DELETE Delete a user. Write-only User Name.
Up to 8 ASCII bytes.
USER/<username>/
PASSWORD
Existing password input for
validating user authentication
prior to executing a password
or privilege change. Also
used for normal login
operations.
Write-only User Name and Password.
Up to 8 ACSII bytes.
USER/<username>/NEW
_PASSWORD
Password input for selecting
a new password value on a
password change.
Read-write User Name = Password.
Up to 8 ACSII bytes.
USER/<username>/
PRIVILEGE
Set/Get a user’s
management access level.
Read-write USER
VIEW
NONE
ADMIN
PRIVILEGE/KVM_OP Required privilege level for
KVM operations
Read-write USER
ADMIN
PRIVILEGE/MEDIA_OP Required privilege level for
Media Redirection
operations.
Read-write USER
ADMIN
PRIVILEGE/USER_OP Required privilege level for
User Account and Password
operations.
Read-write ADMIN (USER and other
levels are not allowed to be
set.) Trying to set returns an
error.
This is a value so that users
can display the requirement
via CLP tools.
PRIVILEGE/CLP_DISPLAY Required privilege level for
CLP operations that do not
allow setting values.
Read-write ADMIN
USER
VIEW
PRIVILEGE/CLP_CHANGE Required privilege level for
any CLP operations that
allow setting and changing
values.
Read-write ADMIN
USER
Setting Name Description Type
Default Value (First in the
List) and (Format)