User Guide

Intel
®
Remote Management Module User’s Guide 23
Rebooting, Cycling System Power, and Turning
off the Remote Server
You can easily reboot Intel
®
Remote Management Module, cycle the power, or turn off
the remote server.
Figure 9. System Power/Reboot Page
To reboot the Intel
®
RMM, cycle the power, or to turn on or off the remote server:
1. Under Manage Server on the left side of the Server Configuration page, click
System Power. Your browser displays the System Power/Reboot page.
2. Execute the desired task:
— Click Reboot to restart the Intel
®
RMM.
— Click Power Cycle to turn the server's power off and turn it on again, (hard
reboot).
— If the server is powered on, click Power Off to turn off the power on the remote
server.
— If the server is powered off, click Power On to turn on the power on the remote
server.
Note: If you want to reset the server (not just the Intel
®
Remote Management Module), then
through the video viewer session and KVM features, you can use the desktop functionality
of the server, (see Chapter 5, “Using the Intel
®
Remote Management Module Virtual
Server Control Application to Manage the Server”).