Tested Memory
The Intel
®
Server Boards S5000PSL, S5000XSL, and S5000XVN, Intel
®
Server Board S5000PSLROMB RAID
Controller, and Intel
®
Storage System SSR212MC2
Main Memory Tested
Fully Buffered ECC, DDR2-677 DIMM Modules
1 GB Sizes (128Mx72)
Manufacturer Part Number
DRAM Part
Number
DRAM
Vendor
PCB Part
Number
AMB
Vendor
AMB
Revision
Heat-sink
Vendor
Rank Date
Micron
MT18HTF12872F
DY-667F1D4
MT47H64M8CF-
3:F
Micron IDT C1 FDHS 2 6/26/08
Crucial
CT12872AF667.18
FF1D4
MT47H64M8CF-
3:F
Micron IDT C1 FDHS 2 6/26/08
Qimonda
HYS72T128420EF
D-3S-B2
HYB18T512805B
2F-3S
Qimonda IDT C1 FDHS 2 7/13/08
TRS TRS32400X
HY5PS1G831CF
P-Y5 rev C
Hynix 0806-2DC IDT C1 Hynix 1 07/22/08
Qimonda
HYS72T128420EF
A-3S-B2
HYB18T512800B
2F-3S
Qimonda Qimonda C1 FDHS 2 6/20/08
Memphis
Electronic AG
DIMDD128M7264
8G-F01EL
EDE5108AJBG-
6E-E rev J
Elpida 001404 Qimonda C1 Logitex 2 10/01/08
Qimonda
HYS72T128501EF
D-3S-C2
HYB18T1G800C2
F-3S-C2
Qimonda IDT AMB+ FDHS 1 8/24/08
Qimonda
HYS72T128901EF
A-3S-C2
HYB18T1G800C2
F-3S-C2
Qimonda Qimonda C1 FDHS 1 9/22/08
Qimonda
HYS72T128401EF
A-3S-C2
HYB18T1G800C2
F-3S-C2
Qimonda Qimonda C1 FDHS 1 9/22/08
Hynix
HYMP112F72CP8
D5-Y5
HY5PS1G831CF
P-Y5
Hynix IDT L4 FDHS 1 11/5/08
Dataram DTM65526B
HYB18T1G800C2
F-3S rev C2
Qimonda
40053A rev
B
IDT C1 Foxconn 1 12/08/08
Smart Modular
Technologies
SG1287FB212852
HEDC
H5PS1G83EFR-
Y5C rev E
Hynix
PG54G240N
FBUB4RAS
rev A
IDT C1 Foxconn 1 01/20/09
ATP
Electronics
AP28K72A8BJE6
S1
K4T1G084QQ-
HCE6 rev Q
Samsung
SP240A08K1
na
NEC D1 Foxconn 1 02/11/09
1
The GB C0 AMB revision does not support closed-loop throttling.
2
This part may show voltage errors in the System Event Log (SEL) during boot. These errors will not affect system
operation and can be ignored.
(+) This vendor is part of the CMTL Certification program. This means this part has/will been tested
across all compatible Intel Server Boards. For further information contact CMTL @ http://cmtlabs.com/
Note: Some memory modules may have thermal issues when used in a non-Intel 1U rack solution. It is
advised that you verify any thermal limitations with your chassis supplier before purchasing a chassis.
Note: The use of x4 FBDIMMs will only be supported with the server system operating in “Performance”
mode (default). The use of x4 FBDIMMs while the server system is configured to operate in “Acoustics”
mode is not supported.