System Configuration User Guide

[CHANNEL::LAN1]
AlertEnable=Enable ; Options: Enable,
Disable
PerMessageAuthentication=Enable ; Options: Enable,
Disable
UserLevelAuthentication=Enable ; Options: Enable,
Disable
AccessMode=AlwaysAvailable ; Options: Disable,
AlwaysAvailable, AccessShared
PrivilegeLevelLimit=Admin ; Options: User,
Operator, Admin
CommunityString=INTEL ; Upto 16 bytes, no
space allowed
ARPEnable=Disable ; Options: Enable,
Disable
ARPResponse=Enable ; Options: Enable,
Disable
ARPInterval=0 ; Decimal value between
0 & 255. This values is in milliseconds. Input value rounded down to the
nearest 500ms value
DHCPEnable=Disable ; Options: Enable or
Disable. If 'Disable' static IP will be used
HostIP=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
SubnetMask=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
GatewayIP=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
GatewayMAC=00-00-00-00-00-00 ; In xx-xx-xx-xx-xx-xx
form
BackupGatewayIP=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
BackupGatewayMAC=00-00-00-00-00-00 ; In xx-xx-xx-xx-xx-xx
form
AlertIP0=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
AlertMAC0=00-00-00-00-00-00 ; In xx-xx-xx-xx-xx-xx
form
AlertIP1=0.0.0.0 ; In xxx.xxx.xxx.xxx
form
AlertMAC1=00-00-00-00-00-00 ; In xx-xx-xx-xx-xx-xx
form
[CHANNEL::LAN3]
AlertEnable=Enable ; Options: Enable,
Disable
PerMessageAuthentication=Enable ; Options: Enable,
Disable
UserLevelAuthentication=Enable ; Options: Enable,
Disable
60 Intel® System Configuration Utility – User Guide