System Configuration User Guide

Note: If the /bcr option is enabled, the quiet boot option cannot be enabled.
4.3.4 Configure BIOS Settings (/bcs)
syscfg /bcs [BIOS_Group_Name] BIOS_Setting_Name Value [BIOS_Setting_Name Value […] ]
BIOS_Setting_Name
The name of the BIOS settings on the BIOS
Setup screen. Refer to the Technical
Product Specification for your server board
for the BIOS Setup setting names.
BIOS_Group_Name
The name of the page in the BIOS Setup
screen. Refer to the Technical Product
Specification for your server board for the
BIOS Setup screen names.
Value
The value for the BIOS Setting.
Sets individual BIOS Settings.
Refer to the Technical Product Specification for your Intel® Server Board for more
information on BIOS Setup options.
Examples:
syscfg /bcs “Quiet Boot” 0
syscfg /bcs “Main” “Quiet Boot” 0 “POST Error Pause” 1
syscfg /bcs “system acoustics and performance configuration” “Set throttling mode” 2
“Altitude” 900 “Set fan profile” 2
Use the syscfg /d biossettings command to show the possible values for the BIOS Setting.
For example:
syscfg /d biossettings group “Main” “Quiet Boot”
Note:
Intel® S5500 Series Server Boards utility does not support configuring “BMC Configuration”
under BIOS “Server Management” settings using the switches “/bcs” and “/d biossettings”.
4.3.5 BIOS Load Default Factory Settings (/bldfs)
syscfg /bldfs
Refer to the Product Guide for your Intel® Server Board for more information on BIOS
Setup default settings.
Loads the default factory BIOS settings.
If the /bldfs option requires a reboot to reset the default settings.
Examples:
syscfg /bldfs
Intel® System Configuration Utility – User Guide 27