System Configuration User Guide

USER
Displays the BMC user settings.
Channel_ID
IPMI Channel ID.
LAN_Alert_Destination_Index
Enter the LAN Alert Destination Index.
Dial_String_Index
Enter the Serial Modem Dial String Index.
Page_Destination_Selector
Enter the Page Destination Selector.
Dial_String_Selector
Enter the Dial String Selector.
Filter_Table_Index
Enter the Filter Table Index.
Policy_Table_Index
Enter the PEF Policy Table Index.
User_ID
Enter an integer between 1 and n, where n is
the number of users supported by the
platform for the BMC User ID. User ID 1 is
the anonymous user (no password).
FWADVCFG
Displays the advanced firmware settings for
the channel, users, and SMTP configuration.
Channel_ID
IPMI Channel ID.
User_ID
BMC User ID. When used with the
FWADVCFG keyword, the configuration
information is displayed for the user.
SMTP_Configuration_Index
Specifies the SMTP configuration in the
firmware email alerting tables.
Displays the specified BMC and BIOS settings.
Note: The /d serial command is not supported on Intel® Server Boards X38MLST, S3200SH,
S5500XX and S3420GP platform series.
Examples:
syscfg /d channel 1
syscfg /d lan 1 2
syscfg /d serial 1 2 3 4
syscfg /d pef 2 1
syscfg /d BIOSSETTINGS individual “Quiet Boot”
syscfg /d BIOSSETTINGS “Set Fan Profile”
syscfg /d BIOSSETTINGS group “Main” “Quiet Boot” “POST Error Pause”
syscfg /d biossettings group “system acoustics and performance configuration” “Set
throttling mode” “Altitude” “Set fan profile”
syscfg /d FWADVCFG 3 2 1
Intel® System Configuration Utility – User Guide 23