Product User Guide

Intel® Remote Management Module 2 User Guide 71
SSH Port
Port number at which the Intel
®
RMM2’s SSH (Secure Shell) server is listening. If left empty the
default value (port 22) will be used.
Bandwidth Limit
The maximum network traffic generated through the Intel
®
RMM2 Ethernet device; value in
Kbit/s.
Enable Telnet
This enables the Telnet client mode.
Enable SSH
This enables the SSH (Secure Shell) client mode.
Disable Setup Protocol
Enable this option to exclude the Intel
®
RMM2 from the setup protocol.
7.6.1.3 LAN Interface Settings
This entry field displays the current settings for the Ethernet/LAN interface of the Intel
®
RMM2.
You may choose between auto negotiation and a fixed setting for the Ethernet transceiver
settings "interface speed" and "duplex mode" in case auto negotiation does not work correctly.
LAN Interface Speed
Depending on your network connection you may select a speed value for this interface.
To adjust the interface automatically, choose "auto-detect" (default value). If this selection
results in erratic behavior of the interface, choose one of other speed options to work with. The
interface will transmit and receive data with that fixed speed.
LAN Interface Duplex Mode
If necessary you may also select a specific duplex mode. The default value is set to "auto-
detect", which leads to an automatic setting of the duplex mode depending on your network
(recommended). As an alternative you may explicitly set the interface to either "half duplex" or
"full duplex" mode.