Product User Guide

Intel® Remote Management Module 2 User Guide 13
The I/O gasket is required to meet EMI requirements.
• Peel the backing from the EMI gasket that is included with your Intel
®
Remote
Management Module 2 kit. See letter “A” in the following figure.
• Adhere the EMI gasket to the I/O riser board where the NIC will contact the I/O riser. See
letter “B” in the figure.
Figure 6: Attaching the EMI Gasket on the Intel
®
Server System S7000FC4UR I/O Riser Board
• Screw the NIC module to the J2B1 header on the I/O riser board, using the provided
screws. This aligns the RJ-45 port with the opening on the back cover of the I/O riser
board. See the following figure.
Figure 7: Installing the Intel
®
RMM2 Dedicated NIC Module