Product User Guide

12
AF002055
Figure 4: Installing the Intel
®
RMM2
AF002056
Figure 5: Installing the Intel
®
RMM2 Dedicated NIC Module
2.3.3 Installation on Intel
®
Server System S7000FC4UR
The following steps detail the installation of Intel
®
RMM2 on the Intel
®
Server System
S700FC4UR.
• Remove the top cover of the Intel
®
Server System S7000FC4UR. For instructions,
see the Intel
®
Server System S7000FC4UR product guide.
• Remove the I/O riser card. For instructions, see the Intel
®
Server System
S7000FC4UR product guide.
• Set the I/O riser card on a static-controlled surface with the components facing up.
• Write down the MAC address on the Intel
®
RMM2. It is on a label attached to the
Intel
®
RMM2. If you do not write down the MAC address before installing the Intel
®
RMM2, you will need to open the system later to record this information before you
can configure the Intel
®
RMM2.