Technical Product Specification

Intel® Remote Management Module IntelP®P Remote Management Module Environmental/Electrical Specifications

The Intel

RMM emulates a monitor by supporting the EDID information with an on-board

nicates the following:

 Allowable resolutions

 Color depths

 Refresh rates

The information within the EDID ROM is communicated from the Intel

RMM and the

baseboard’s graphics controller via the Display Data Channel (DDC) interface. The DDC uses

an I

C protocol.

Table 12. Supported Video Resolutions and Refresh Rates

EEPROM. This information is used by the system software for configuration purposes to allow

the graphics controller to work together with the Intel

RMM. The Intel

RMM EDID

commu

Resolution Refresh Rate

640X480 60Hz

72Hz

75Hz

85Hz

640 X 480 100Hz

800X600 60Hz

72Hz

75Hz

85Hz

1024X768 60Hz

72Hz

75Hz

85Hz

1280X960 60Hz

1280X1024 60Hz

4.7 System Reset Control

The t indication of a system reset via the LPC reset signal. The LPC

reset is considered a hard reset that resets the following:

The BIOS will take control of the system after the reset and perform system initialization. This

reset signal does not reset the Intel

RMM.

In el

RMM receives an

 CPU

 Chipset

 I/O subsystem

Revision 1.0