User Guide

44 Intel
®
Remote Management Module User’s Guide
SELF_TEST/
SUBCOMPONENT
Sets which system
subcomponent is under test.
Defaults to NONE. Set this
attribute before setting
SELF_TEST/CONTROL to 1
(which starts the self test).
Read-write 0 = NONE Under Test
1 = FML Channel 1
3 = IPMB
6 = DVO (digital video)
7 = LAN3
8 = LAN2 (not supported in this
release)
The USB interface of the Intel
®
RMM is tested by the
mmconfig –t command when
performed on the host
console.
SELF_TEST/REASON Reason a test failed in a
subcomponent. The reason
codes vary per
subcomponent.
Read-only FML:
• 0 = No error.
• 1 = Send Failed.
• 2 = Send & Receive
Failed.
IPMB:
• 0 = No error.
• 1 = IPMB Failed to send.
DVO:
• 0 = No error, no video
signal detected.
• 1 = No error, video signal
detected.
• 2 = Error, not running.
LANx:
• 0 = No error.
• 1 = NIC to PHY link not
established (MII not
working)
• 2 = PHY self test failed.
• 3 = NIC self test failed.
• 4 = NIC internal loop back
failed.
Setting Name Description Type
Default Value (First in the
List) and (Format)