User Guide

42 Intel
®
Remote Management Module User’s Guide
CTRL/SERIAL_MUX_STATE Value decides how the Intel
®
RMM will program the serial
mux on the server board.
Read-write Auto: Defaults to server board
routing, unless a connection
request comes in via Telnet or
SSH2, and then the Intel
®
RMM auto selects mux to itself
via IPMI to IPMB, and on a
connection loss, sets the mux
back to server board.
Intel
®
RMM: Intel
®
RMM sets
mux to always select the RMM
connector.
Baseboard: Intel
®
RMM sets
the mux to always select the
server board logic.
CTRL/DEFAULT_SETTINGS Forces all settings to factory
defaults
Write only 1: Set all settings to factory
defaults.
HTTPS/ENABLED If page serving using the
HTTPS protocol is enabled.
Read-write True, Enabled, default
False, not enabled.
HTTPS/PORT IP Port to enable HTTPS
serving on.
Read-write 443
KVM/ENABLED KVM Server allows KVM
sessions to start.
Read-write True, enabled.
False, not enabled.
KVM/KVM_PORT KVM Server keyboard and
mouse signals port number
Read-write 5900
KVM/VIDEO_PORT KVM Server video signal port
number
Read-write 5901
INFO/
FIRMWARE_VERSION
String describing the
firmware revision level
Read-only
INFO/SDR_VERSION String Describing the SDR
revision level.
Read-only
INFO/PXA_VERSION String describing the Intel
PXA processor version.
Read-only
INFO/
WEB_CONTENT_VERSION
String describing the Web
server file system content
version.
Read-only
INFO/
BOOTLOADER_VERSION
String describing the installed
boot loader version
Read-only
INFO/HARDWARE_REV String describing the
hardware revision level
Read-only
INFO/MAC_TYPE Hex representation of the
MAC_TYPE bits.
Read-only
Setting Name Description Type
Default Value (First in the
List) and (Format)