User Guide

Intel
®
Remote Management Module User’s Guide 39
LAN3/ENABLED Interface enabled. Read-write TRUE
FALSE
LAN3/NETWORK Network IP Address,
Netmask, Gateway - sets all
three before restarting the
LAN interface. Needed for
remote configuration utilities.
Read-write 192.168.0.122
255.255.255.0
192.168.0.1
LAN3/IPADDR Network IP Address. Read-write 192.168.0.122
LAN3/GATEWAY Network Gateway. Read-write 192.168.0.1
LAN3/NETMASK Network Mask. Read-write 255.255.255.0
LAN3/SPEED LAN Speed. Read-write AutoSense
100mb
10mb
LAN3/DUPLEX LAN Duplex. Read-write AutoSense
Full
Half
LAN3/DHCP DHCP Enable. Read-write True, DHCP enabled
False, Static
INFO/DATE Intel
®
RMM date. Read Only 12-17-2004
INFO/TIME Intel
®
RMM time. Read Only 23:00:00
DHCP/DEFAULT_IP_ADDR This address is used when
DHCP client requests fail, or
when a static IP address is
selected, but the user
specified address is an
invalid IP address per TCP/IP
rules.
Read-write 192.168.0.122
USER/COUNT Returns number of user
accounts.
Read Only 1 to thousands
USER/TIMEOUT Set/Get the number of
seconds between commands
before a user needs to login
again.
Read-write 600
Setting Name Description Type
Default Value (First in the
List) and (Format)