User Guide

34 Intel
®
Remote Management Module User’s Guide
Connecting a CD-ROM or DVD-ROM Drive
The CD/DVD Drive panel allows you to select a CD-ROM or DVD-ROM device from
the attached CD-ROM / DVD-ROM drives. You can also select the ISO image option to
select a single CD-ROM / DVD-ROM image file. If you do not want to select either of
these options you can select the None option.
Note: Only one option from the CD/DVD Devices or Filesystem panel can be selected at any one
time. The selected generic mass storage device is not connected until you click Connect.
Viewing the Connected Device Status
The Intel
®
Remote Management Module Virtual Media panel lists the generic mass
storage and CD/DVD devices that are currently connected. For each connected device, the
target drive letter, where the target drive is connected, and the number of bytes read for
that device are displayed.
Operating the Device Remotely
Once the device has been connected, operate it remotely through the Intel
®
Remote
Management Module Virtual Server Control viewer. (See “Interacting With the Server” on
page 31).