System Configuration User Guide

4.4.25 Serial Page Configuration (/spc)
syscfg {/spc | /serialpageconf} Channel_ID Page_Destination_Selector Dial_String_Selector {1 |
2} {7 | 8} {none | odd | even} {9600 | 19200 | 38400 | 115200}
Channel_ID
IPMI Serial Channel ID (this must be 4 for
S5000PAL, S5000PSL, and S5000PSA server
boards)
Page_Desitination_Selector
Page Destination Selector
Dial_String_Selector
Page String Selector
1 | 2
Number of parity bits
7 | 8
Number of data bits
none | odd | even
Parity
9600 | 19200 | 38400 | 115200
Baud Rate
Configures serial paging for platform alerting with the BMC on the specified channel. See
IPMI 2.0 Specification, Chapters 14 and 25, for more information on IPMI Serial/Modem
interface and commands.
Note: This command is not supported on Intel® Server Boards X38MLST, S3200SH, S55XX
and S3420GP.
Example:
syscfg /spc 4 2 4 1 8 none 19200
4.4.26 Serial Page Enable (/spe)
syscfg {/spe | /serialpageenable} Channel_ID {0..255} SNMP_Community_String
Channel_ID
IPMI Channel ID (this must be 4 for
S5000PAL, S5000PSL, and S5000PSA server
boards)
0..255
Page Blackout in minutes
SNMP_Community_String
SNMP Community String
Enables serial paging for platform alerting by the BMC on the specified channel. See IPMI
2.0 Specification, Chapters 14 and 25, for more information on IPMI Serial/Modem interface
and commands.
Note: This command is not supported on Intel® Server Boards X38MLST, S3200SH, S55XX
and S3420GP.
Example:
syscfg /spe 4 3 "modem public"
Intel® System Configuration Utility – User Guide 47