Server Board Family Datasheet

Intel® S5000 Server Board Family Datasheet System BIOS
Revision 1.3
Intel order number D38960-006
75
Setup Item Options Help Text Comments
AHCI Mode Enabled
Disabled
Advanced Host Controller
Interface (AHCI) option ROM will
enumerate all AHCI devices
connected to the SATA ports.
Contact your OS vendor
regarding OS support of this
feature.
Unavailable if the SATA mode is
“Legacy” or if RAID Mode is
selected.
When AHCI is enabled:
The identification and
configuration is left to the AHCI
Option ROM. Only devices
supported by the AHCI Option
ROM will be displayed in setup
(SATA HDD and SATA CDROM)
other devices are available in the
OS after their drivers are loaded.
SATA 4 and SATA 5 will appear
in the HDD information listing.
Configure SATA as
RAID
Enabled
Disabled
SATA controller will be in RAID
mode and the Intel® RAID for
Serial ATA option ROM will
execute.
Unavailable when AHCI mode is
enabled. This mode can be
selected only when the SATA
controller is in Enhanced Mode.
When this mode is enabled, no
SATA drive information is
displayed.
Primary IDE Master <Not Installed / Drive
information>
Information only
Primary IDE Slave < Not Installed / Drive
information>
Information only
SATA Port 0 < Not Installed / Drive
information>
Information only; Unavailable
when RAID Mode is enabled.
SATA Port 1 < Not Installed / Drive
information>
Information only; This field is
unavailable when RAID Mode is
enabled.
SATA Port 2 < Not Installed / Drive
information>
Information only; This field is
unavailable when RAID Mode is
enabled.
SATA Port 3 < Not Installed / Drive
information>
Information only; This field is
unavailable when RAID Mode is
enabled.
SATA Port 4 < Not Installed / Drive
information>
Information only; This field is
only available when AHCI Mode
is enabled.
SATA Port 5 < Not Installed / Drive
information>
Information only; This field is
only available when AHCI Mode
is enabled.