Product User Guide

Intel® Remote Management Module 2 User Guide 77
7.6.3.4 Group Based System Access Control
This is similar to the option above, except that you can specify a group of IP addresses and not
a network with a network mask.
Example of Use:
In the following example (Figure 66) the Intel
®
RMM2 is configured to be accessible for all IP
addresses which passed the IP Access Control rules, except for users with an IP address which
follow the rule below:
Table 6: Example of Group Base Stystem Access Control
Rule
#
Starting IP Ending IP Group Acti
on
Effect
1 192.168.5.2 192.168.5.25
4
Admin Drop All users of the group
“Admin” with IP addresses of
the Private Class C (16-bit
block) subnet 5 can not
access the Intel
®
RMM2
module. Only the “Admin”
with the IP 192.168.5.1 can
login on the Intel
®
RMM2.
Additional to the one admin
all other user groups which
pass the IP Access Control
rules can access the Intel
®
RMM2.

Figure 66: Example of Group Based System Access Control