Product User Guide

Intel® Remote Management Module 2 User Guide 65
7.5 KVM Settings
7.5.1 User Console
Figure 58: Remote Console Setting for Users
7.5.1.1 Remote Console Settings for Users
This selection box displays the user ID for which the values are shown and for which the
changes will take effect. Select the desired user from the selection box and press the button
"Update". This will result in displaying the according user settings below.
You are allowed to change the settings of other users only if you have the necessary access
rights for this task. You must be a member of the admin super user group.
For a user without
the correct permissions it is not possible to change the settings for any other user and this
configuration sub-section will not be displayed.
7.5.1.2 Transmission Encoding
The Transmission Encoding setting allows changing the image-encoding algorithm that is used
to transmit the video data to the Remote Console window. It is possible to optimize the speed of
the remote screen depending on the number of users working at the same time and the
bandwidth of the connection line (Modem, ISDN, DSL, LAN, etc.).
• Automatic detection: The encoding and the compression level is determined
automatically from the available bandwidth and the current content of the video
image.
• Pre-configured: The pre-configured settings deliver the best results because of
optimized adjustment of compression and color depth for the indicated network
speed.