Product User Guide

Intel® Remote Management Module 2 User Guide 39
5. Getting Started with Intel
®
RMM2 Operation
This section describes the operation of the Intel
®
RMM2. It will cover the initial login to the
advanced features of the module.
5.1 Logging in for the First Time
The Intel
®
RMM2 add-in card may be accessed using a standard Java enabled web browser. You
may use the HTTP protocol or a secure encrypted connection via HTTPS. Just enter the
configured IP address of the Intel
®
RMM2 add-in card into your web browser.
http://192.168.1.22/
In order to use a secure connection type in:
https://192.168.1.22/
This will take you to the Intel
®
RMM2 login page as shown in Figure 24.
Figure 24: Login screen
The initial login settings for the web interface are as follows:
User = admin
Password = password
After the initial login, system administrators and IT professionals may change passwords, create
new users, and have full control over access to the Intel
®
RMM2. Note that the password is case
sensitive.
5.2 Prerequisites
The Intel
®
RMM2 features an embedded operating system and applications offering a variety of
standardized interfaces. This section describes the interfaces and how to use them. The
interfaces are accessed using TCP/IP protocol. The following interfaces are supported.
• HTTP/HTTPS
Full access is provided by the embedded web server. You can access the Intel
®
RMM2
using the insecure HTTP protocol or using the encrypted HTTPS protocol. Whenever
possible use HTTPS.