Product User Guide

Intel® Remote Management Module 2 User Guide 35
4.3.2 EFI Version
Follow below steps to execute the KiraTool on the EFI shell.
1. Boot the server to the EFI shell.
2. Copy “KiraTool.efi” from the KiraTool package to a USB key, and plug to the USB port of
the server.
3. Execute “map –r” at the EFI shell to map the USB key; usually it will be mapped with
device “fs0”.
4. Execute “ fs0:” to change current folder to “fs0:\>”.
5. Execute the KiraTool command.
Or you also can copy “KiraTool.efi” to local hard disk to execute it with the same way.
Figure 18: Working with KiraTool under EFI
4.3.3 DOS* Version
To execute the DOS* version of the KiraTool, you need to boot the server to DOS* and directly
execute the KiraTool command as shown below.
Figure 19: Working with KiraTool under DOS*