Product User Guide

Intel® Remote Management Module 2 User Guide
Commands Notes
fw validate [-h] [-
o] <fw bin file>
Checks firmware compatibility (-h = cross-
hwid, -o = cross-oem).
fw [ver]
Shows firmware version information.
serial [show]
Shows device's serial number.
defaults
Resets all settings to factory defaults.
reset
Hard-resets the module.
cfg backup
<filename>
Backup the device's configuration to a file.
cfg restore
<filename>
Restore the device's configuration from a
file.
cfg get <key>
Read and show the given configuration
key.
cfg set <key>
<value>
Sets the given configuration key to the
given value.
admin name <name>
Changes new admin name.
admin passwd
<passwd>
Changes admin's password.
admin [show]
Shows admin's name.
fni [show]
Show status of IPMI over FML forwarding.
fni set <on/off>
Turn IPMI over FML forwarding on of off.
raw <hex bytes>
Send raw command and prints raw
response (<netfn> <cmd> [<d1>] [<d2>] ...
[<dN>]: e.g. 06 01).
test <test>
Performs module self test and shows
results (return value is ==0 on success and
=0 in failure).
device
Tests whether the device is available.
video <subtest>
Tests video interface (DVO/DVI).
status
Checks detected video signal and
resolution.