Product User Guide

Intel® Remote Management Module 2 User Guide 91
The following actions can be initiated via SNMP:
• Reset server
• Power on/off server
• Reset the Intel
®
RMM2
The following events are reported by the Intel
®
RMM2 via SNMP:
• Login trial at the Intel
®
RMM2 failed
• Login trial at the Intel
®
RMM2 succeeded
• Denying access to a particular action
• Server was reset
• Server was powered on/off
The SNMP settings panel, as shown in Figure 76, allows you to change SNMP related
parameters.
7.6.11.1 Enable SNMP Agent
If this option is checked, the Intel
®
RMM2 will reply to SNMP requests.
Note: If a community is left blank, you cannot perform the corresponding request. For example,
if you want to disable the option to reset the Intel
®
RMM2 via SNMP, do not set a write
community.
7.6.11.2 Read Community
This is the SNMP community, which allows you to retrieve information via SNMP.
7.6.11.3 Write Community
This community allows you to set options and to reset the Intel
®
RMM2 or the host via SNMP,
i.e., all that affects the host or the Intel
®
RMM2.
7.6.11.4 System Location
Enter a description of the physical location of the host. The description will be used in reply to
the SNMP request "sysLocation.0".
7.6.11.5 System Contact
Enter a contact person for the host. The value will be used in reply to the SNMP request
"sysContact.0".
7.6.11.6 “Click here to view the SNMP MIB”
This link allows you to view or save the Intel
®
RMM2 SNMP MIB file from your web browser.
This file may be necessary for an SNMP client to communicate with the Intel
®
RMM2.