Technical Product Specification
IntelP®P Remote Management Module - Web Console Intel® Remote Management Module
6. Intel
®
Remote Management Module - Web Console
This section contains additional details on certain features of the Intel
®
Remote Management
Module - Web Console (Intel
sers Guide.
6.1
Access is provided to the Intel RMM - Web Console via the secure HTTPS protocol.
ser.
®
RMM - Web Console). These details are in addition to the
information previously covered in the Intel
®
RMM U
Accessing the Intel RMM - Web Console
®
®
6.1.1 User Security
User security will permit or deny access to the system based on the authentication of the u
The following access levels are used:
Table 14. User Access Levels
User Description
Adm Administrator level users are allowed. No restriction on allowed commands
User Commands that change users configuration are restricted
View Commands are restricted to read-only access of system information.
Each IP address available to the web server has one port setting, an HTTPS port. The HTTPS
port is the port the web server listens to for SSL connections
. Traditionally, the HTTPS port is
.
6.1.2.2 Power Control Page
The power status will be updated every 30 seconds. The displayed status will be updated after
each reading
port “443”.
6.1.2 Auto Refresh
The summary page and power control page will be refreshed automatically
6.1.2.1 Summary Page
All sensor readings will be updated every 60 seconds. The displayed values will be updated
after each reading
Revision 1.0
36