Technical Product Specification

Intel® RAID Controller SRCSAS18E Appendix A: Event Messages and Error Codes

Revision 1.01

Intel order number D61769-001

Appendix A: Event Messages and Error Codes

This appendix lists the Intel

RAID Web Console 2 events that may appear in the event log.

The Intel

RAID Web Console 2 utility monitors the activity and performance of all controllers in

the server and the devices attached to them. When an “event” occurs—such as the completion

of a consistency check or the removal of a physical drive—an event message is displayed in the

log displayed at the bottom of the Intel®

RAID Web Console 2 screen. The messages are also

logged in the Windows Application log (Event Viewer). Error event levels are:

 PROGRESS: This is a progress posting event. Progress events are not saved in

NVRAM.

 INFO: Informational message. No user action is necessary.

 WARNING: Some component may be close to a failure point

 CRITICAL: A component has failed, but the system has not lost data

 FATAL: A component has failed, and data loss has occurred or will occur

 DEAD: A catastrophic error has occurred and the controller has died. Seen only after the

controller has been restarted.

The following table lists all of the Intel

RAID Web Console 2 event messages.

Number Type Description

0 Info Firmware initialization started (PCI ID %04x/%04x/%04x/%04x)

1 Info Firmware version %s

2 Fatal Unable to recover cache data from TBBU

3 Info Cache data recovered from TBBU successfully

4 Info Configuration cleared

5 Warning Cluster down; communication with peer lost

6 Info Logical drive %s ownership changed from %02x to %02x

7 Info Alarm disabled by user

8 Info Alarm enabled by user

9 Info Background initialization rate changed to %d%%

10 Fatal Controller cache discarded due to memory/battery problems

11 Fatal Unable to recover cache data due to configuration mismatch

12 Info Cache data recovered successfully

13 Fatal Controller cache discarded due to firmware version incompatibility

14 Info Consistency Check rate changed to %d%%

15 Dead Fatal firmware error: %s

16 Info Factory defaults restored

17 Info Flash downloaded image corrupt

18 Caution Flash erase error

19 Caution Flash timeout during erase

20 Caution Flash error

21 Info Flashing image: %s