WinPE Instructions

3 Booting From Customized CD

Insert the above-created CD into the computer on which you want to run Windows PE

and start the computer. The computer will start Windows PE OS from the CD, which is

a read only media. Once the OS is up, the user can navigate to the Intel’s system

configuration utilities repository and run the utilities.

Note: For WinPE 1.x, plug and play hardware detection occurs only while the Factory.exe

Windows PE command runs. Therefore, the Plug and Play devices (like the USB

device) that you want to add to your Windows* PE image must be attached to the

computer when you start Windows* PE.

Intel® Server Utilities Deployment Procedure for Windows* Preinstallation Environment – White Paper