System Configuration User Guide

4.4.2 Clear SEL (/csel)
syscfg {/csel | /clearSEL}
Clears the System Event Log (SEL).
syscfg /csel
syscfg /clearSEL
4.4.3 Date and Time (/dt)
syscfg {/dt | /timeofday} hh:mm:ss mm/dd/yyyy
hh:mm:ss
Hours (24 hour clock), minutes, and seconds.
mm/dd/yyyy
Month, day, and year.
Sets the time of day stored in the Real Time Clock (RTC) by the BIOS.
Example:
syscfg /dt 18:45:00 12/20/2007
4.4.4 email Alert Configure (/eac)
syscfg {/eac | /emailalertconf} SMTP_Configurtion_Index {1 | 2 | 3} ASCII_String
SMTP_Configuration_Index
1 to n. An index into the SMTP configuration table in
firmware. The maximum number n depends on the
firmware on your server board (refer to your server
documentation for details).
{1 | 2 | 3}
Configuration Parameter selector:
1=From Address
2=To Address
3=Subject Line
ASCII_String
1 to 64 characters. This is the value for the selected
parameter. Use double quotes (") to enclose strings
that include space characters.
Configures the From, To, and Subject lines in the firmware email alerting SMTP
configuration table.
Note: This command is not supported on Intel® Server Boards X38MLST and S3200SH.
Example:
syscfg /eac 1 1 [e-mail]
4.4.5 email Alert Enable (/eae)
syscfg {/eae | /emailalertenable} Sender_Name
32 Intel® System Configuration Utility – User Guide