Server Board Family Datasheet

Intel® S5000 Server Board Family Datasheet System BIOS
Revision 1.3
Intel order number D38960-006
97
Setup Item Help Text Comments
Save as User Default
Values
Save current BIOS Setup Utility values as
custom user default values. If needed, the user
default values can be restored via the Load
User Default Values option below.
Note: Clearing CMOS or NVRAM will cause the
user default values to be reset to the factory
default values.
User is prompted for confirmation.
Load User Default
Values
Load user default values. User is prompted for confirmation.
3.8 Loading BIOS Defaults
Different mechanisms exist for resetting the system configuration to the default values. When a
request to reset the system configuration is detected, the BIOS loads the default system
configuration values during the next POST. The request to reset the system to the defaults can
be sent in the following ways:
 A request to reset the system configuration can be generated by pressing <F9> from
within the BIOS Setup utility.
 A reset system configuration request can be generated by moving the clear CMOS
configuration jumper.
The following steps will load the BIOS defaults:
1. Power down the system. (Do not remove AC power.)
2. Move the Clear CMOS jumper from pins 1-2 to pins 2-3.
3. Move the Clear CMOS jumper from pins 2-3 to pins 1-2.
4. Power up the system.
3.9 Security
The BIOS provides several security features. This section describes the security features and
operating model.
3.9.1 Operating Model
The following table summarizes the operation of security features supported by the BIOS.