Technical Product Specification

Intel® Remote Management Module IntelP®P Remote Management Module Overview

When mounted in an Intel

rack chassis, the Intel® RMM NIC Interface connects directly to the

chassis in a reserved location as described in the Intel

server board quick start guide.

The communication path between the Intel® RMM NIC Interface and Intel

Remote

Management Module in a pedestal server is via a cable that plugs into a 40-pin header on the

Intel® RMM NIC Interface and on the baseboard.

The pin-outs of the rack and pedestal connectors are shown below. There are no cable

connectors on the Intel

RMM itself. The connectors are keyed on the cable and connector

assemblies to prevent incorrect installation.

2.4.3.1 Pedestal Intel

RMM NIC Connector Interface

Table 3. Pedestal Connector

Pin Signal Pin Signal

1 MAN LAN type2 2 MAN LAN Type 1

3 VCC 3.3Aux 4 MII_MDIO

5 VCC 3.3Aux 6 MII_MDC

7 GND 8 MII_RXD3

9 GND 10 MII_RXD2

11 GND 12 MII_RXD1

13 GND 14 MII_RXD0

15 GND 16 MII_RXDV

17 GND 18 MII_RXCLK

19 GND 20 MII_RXER

21 GND 22 Pulled Pin

23 GND 24 MII_TXCLK

25 GND 26 MII_TXEN

27 GND 28 MII_TXD0

29 GND 30 MII_TXD1

31 GND 32 MII_TXD2

33 GND 34 MII_TXD3

35 VCC 3.3Aux 36 MII_COL

37 VCC 3.3Aux 38 MII_CRS

39 VCC 3.3Aux 40 MII_TXER

Revision 1.0