User Guide

Intel
®
System Configuration Utility – User Guide 23
Use the syscfg /d biossettings command to show the possible values for the BIOS Setting.
For example:
syscfg /d biossettings group “Main” “Quiet Boot”
Note:
Intel
®
S1200BT and S1400/S1600/S2400/S2600/S4600 Series Server Boards utility does
not support configuring “BMC Configuration” under BIOS “Server Management” settings
using the switches “/bcs” and “/d biossettings”.
4.3.6 BIOS Load Default Factory Settings (/bldfs)
syscfg /bldfs
On S1400/S1600/S2400/S2600/S4600 platform series the command is
syscfg /bldfs [BIOS administrator password]
Refer to the Product Guide for your Intel
®
Server Board for more information on BIOS Setup
default settings.
Load the default factory BIOS settings.
If the /bldfs option requires a reboot to reset the default settings.
Examples:
syscfg /bldfs
On S1400/S1600/S2400/S2600/S4600 platform series.
1. When BIOS administrator password is set and it value is “admin@123”
syscfg /bldfs admin@123
2. When BIOS administrator is not set.
syscfg /bldfs ""
4.3.7 BIOS Variable (/bvar)
syscfg /bvar
On S1400/S1600/S2400/S2600/S4600 platform series the command is
syscfg /bvar [BIOS administrator password]
The utility provides BIOS switch to create, modify, or delete a new EFI variable of user
choice. The command line option of each of these commands is depicted in the following