Service Guide for Intel Server System H2000WP

Hardware Installations and Updates
Intel
®
Server System H2000WP Family Service Guide 21
Figure 30. Removing Processor Heatsink
Installing the Processor
Caution: Processor must be appropriate: You may damage the server board if you install a
processor that is inappropriate for your server. For a web link to the list of compatible processor(s),
see Additional Information and Software on page vi.
Caution: ESD and handling processors: Reduce the risk of electrostatic discharge (ESD) damage
to the processor by doing the following:
1. Touch the metal chassis before touching the processor or server board. Keep part
of your body in contact with the metal chassis to dissipate the static charge while
handling the processor.
2. Avoid moving around unnecessarily.
Caution: Protective socket cover needs to be removed for proper cooling of the processor; failure
to remove the cover could result in damage to the system.
1. Open the Socket Lever. Push down the lever handle on the OPEN 1st side and away from the
socket to release it. (see letter A). Repeat the steps to release the lever on the other side (see
letter B).
Figure 31. Installing Processor – Open the Socket Lever
2. Open the Load Plate. Press the locking lever slightly to raise the load plate (see letter A). Open
the load plate all the way (see letter B).