Service Guide for Intel Server System H2000WP

Hardware Installations and Updates
Intel
®
Server System H2000WP Family Service Guide 19
Removing the Air Duct
1. lift the rear edge of the air duct.
2. Remove the air duct when it is about 45 degrees to the node tray.
Figure 27. Removing the Air Duct
Installing the Air Duct
1. Put the A edge of air duct down to fan set edge first with 45 degrees (see letter A).
2. Then slowly put down the B edge of air duct down until the sir duct surface is aligned
with tray side wall. (see letter B)
Figure 28. Installing the Air Duct