Service Guide for Intel Server System H2000WP

Hardware Installations and Updates
Intel
®
Server System H2000WP Family Service Guide 17
Removing the Node Tray
1. Carefully push in the latch on the left hand of Node Tray.
2. Pull the handle with the Node Tray while still press the latch.
Figure 23. Pulling out the Node Tray
Installing the Node Tray
1. Align and slide in the Node Tray to the chassis rail.
2. Push the Node Tray along the rail until the latch locks in position with a “tick”.
Figure 24. Installing the Node Tray
Removing and Installing the Redundant Power Supply Unit
The system equipped with two CRPS for redundancy. Each of them can be hot swappable.