Monthly Specification Update

Monthly Specification Update
Implication The Intel
®
Xeon Phi
™
Coprocessor may not be recognized using the default
BIOS settings because it requires more PCI space.
Status This issue is fixed in BIOS release 02.01.0002.
Workaround Press F2 during POST to enter the BIOS setup interface. Navigate to
Advanced -> PCI Configuration -> Memory Mapped I/O Size and change the
value to 16G or larger. The value also depends on your system PCI
configuration.
28.
Intel
®
FDR InfiniBand* ConnectX*-3 I/O Module may not comply with FCC
and Industry Canada regulations
Problem Intel
®
FDR InfiniBand* ConnectX*-3 I/O Module AXX1FDRIBIOM and
AXX2FDRIBIOM may not comply with Part 15 of the Federal Communications
Commission (FCC) and Industry Canada regulations when used with copper
InfiniBand* cables.
Implication Except for not complying with FCC and Industry Canada regulations when
used with copper InfiniBand* cables, there is no other functionality impact. And
except for the United States of America and Canada where the regulations
apply, no other countries are impacted.
Status This issue is fixed by Mellanox* InfiniBand* ConnectX*-3 firmware 2.11.1308
and later releases. Refer to the following website for downloading:
http://www.mellanox.com/page/firmware_table_Intel
.
Workaround None.
29.
Intel
®
I/O module or Intel
®
Xeon Phi
™
cannot be detected during FRUSDR
update
Problem Intel
®
I/O module or Intel
®
Xeon Phi
™
cannot be detected during FRUSDR
update. They are not accessible by IPMI command “Read FRU Data”.
Implication The thermal sensors of Intel
®
I/O module or Intel
®
Xeon Phi
™
are not accessible.
Status This issue may be fixed in the next BMC FW release.
Workaround Use IPMI command to access the thermal sensors.
30.
Cannot enter the LSI* 9200 family adapter BIOS configuration interface
Problem When the server node first boots with LSI* 9200 family adapter, the LSI*
adapter BIOS configuration interface cannot be accessible by clicking “Ctrl+C”
key during POST.
Implication The keyboard does not respond during LSI* adapter POST.
14