Monthly Specification Update

Status This issue is fixed with Intel

Netwrok Driver Rev 16.8 and later versions.

Workaround None.

17.

The power supply sensors may not be available after power cycles

Problem Some PSU sensors may not be available by IPMI command or reading through

the integrated BMC web console after serveral AC power cycles.

Implication The PSU sensor readings are not available from Node 3 and Node 4.

Status This issue is fixed in the BMC 1.06 and later releases.

Workaround None.

18.

The chassis sags about 2.0 mm when fully loaded in the rack

Problem A fully loaded chassis (34kg) sags about 2.0 mm when installed in the rack.

Implication The maximum sag (~2.0mm) will happen at the rear of the chassis.

Status This issue is fixed in all 1600W system SKUs.

Workaround Leave 1U space under the H2000WP chassis when installing it in the rack or

load the system device shorter than 21” under the H2000WP chassis

adjacently.

19.

Incorrect picture titles in the Chassis Quick Reference

Problem The Intel

Server System H2000WP Family Chassis Quick Reference

(document ID G53413-001) has four incorrect picture titles as shown below.

The correct title names should be “H2000WP”, “H2312WP”, “H2216WP”, and

“S2600WP”. All schemes and configuration diagrams are correct for H2000WP.

The impacted servers systems are listed in the table below. This problem has

been fixed in the updated Chassis Quick Reference (document ID G53413-

002).

Impacted Product Name

Impacted Serial Number

H2312WPQJR

AZB22130201 – AZB22130300

AZB22140001 – AZB22140100

H2312WPJR

AZB22140101 – AZB22140300