Chassis Service Guide

Hardware Installations and Upgrades
14 Intel
®
Server System H2000JF Family Service Guide
Figure 23. Removing the PSU
Installing the Power Supply Unit
1. Align and slide in the PSU to the power cage rail.
2. Push the PSU along the rail until the latch locks in position with a “tick”.
Figure 24. Installing the PSU
Installing and Removing Hot-swap Hard Drive
Caution: If you don't install all drives, empty drive bays must be occupied by carriers with plastic
drive blank provided to maintain proper system cooling.
Installing a Hard Disk Drive into 3.5" Hard Drive Carrier
1. Remove the four screws securing the HDD interface bracket and install 3.5” HDD with screws
shown in letter A.